Disclaimer | This article may contain affiliate links, this means that at no cost to you, we may receive a small commission for qualifying purchases.
To comply with Australian safety standards, it is important to use high-quality walkways on high-rise rooftops to keep workers secure. That means you want walkways that are non-slip in design or which are made of Fibre Reinforced Plastic (FRP). If you choose a pathway that is about 600mm wide, you can easily add onto the walkway, thus making the path longer or wider if you choose.
A Non-slip Walkway
This type of system is made to prevent trips or falls – mishaps that can easily happen if safeguards are not in place. The non-slip roof walkways also safeguard roof sheets in heavily trafficked areas. As a result, the platforms offer an easy construction as well as a maintenance-free and cost-effective solution for rooftops regularly subjected to varying kinds of foot traffic.
By law, owners of high-rise type roofs must offer safe entry to roof equipment. FRP walkway systems then make it possible to access rooftops for the servicing of air conditioning or performing other maintenance requests. This type of roof-top walkway also protects the roof from damage. In order to keep people from falling, FRP type walkways are made of composite materials that are manufactured by thermosetting a plastic resin with fibres made of glass.
Some Noteworthy Statistics
According to a report compiled by Safe Work Australia, claims for serious injuries due to a fall from height numbered just over 7,700 from 2010 to 2011. Therefore, approximately 21 employees suffered from a falls-related injury per day.
Males, according to the statistics, accounted for 75% of the falling mishaps. The report added that a typical falls-associated claim involved taking 6 weeks off work. That statistic is quite a bit longer than the approximately 4-week absence for other serious injury claims.
FRP Walkway Benefits
As a result, it is imperative that anyone who maintains or owns a high-rise building, who also must ensure the safety of roof access, add roof access walkways that are non-slip and/or made of FRP. Given the above statistics, installing roof walkway systems is a necessary activity. By including FRP or non-slip walkways, you will experience the following advantages:
- Improved access to the roof
- Enhanced safety
- Dimensional stability
- A walkway system that is resistant to corrosion, electricity and chemicals
- UV stability
- A lower installation cost
- A longer life, thereby making access more dependable for a longer length of time
Standard Sizes for Walkways
Standard sized roof walkway systems are about 15mm or 25mm thick and as much as 1,200mm wide. You can also customise the product by configuring the sizing yourself. Work with a walkway supplier who will ensure your walkway is designed and engineered to your specifications.
Does Your Rooftop Have Boundary Protection?
If your building needs regular maintenance or must be accessed for any other reason, you cannot ignore the safeguards that need to be installed. In addition to a proper walkway, your rooftop should be protected by guard rails as well.
Safety is a priority whenever you are securing an entrance at a significant height. Therefore, do all you can to meet the regulatory requirements set forth for rooftop safety. You can reference product information by visiting the Fall Protect’s site. Other items that are necessary in making rooftops safe include pull-down ladders, cages, handrails, roof anchors, and static-lines. Review all of the items and see where they might fit into your high-rise rooftop design.
When making a choice, think about the kind of services that need rooftop access and the workers that regularly access your roof. Ensure their safety and reduce your liability with the proper safeguards in place.